jetex carb
Posted: Sun Jun 19, 2016 12:30 pmRunning a jetex carb. Sticker next to the mixture screw says keep max 3/4 of a turn. Do I ignore this? On a dellorto I normally start at 1 1/2 turns. Please advise. Thanks.
yes ignore that.
This is quite a good guide
http://www.mbscooters.co.uk/info/setting-up-*-engine-carbs-3/setting-up-*-engine-carbs-2+151.html
I always recommend setting the idle circuit first . Adjust the idle speed and air mixture screws until you have a stable idle before moving on .
