26mm dellorto settings
Posted: Sun Jun 19, 2016 7:55 pmI'm thinking of putting a 26mm phbh onto a standard gp200, clubman exhaust and through the air box. Anyone got a similar set up or any idea of a starting point for the jetting. Thanks
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
https://www.ilambretta.co.uk/forum/
26mm dellorto settings
Page 1 of 1
Posted: Sun Jun 19, 2016 7:55 pmRe: 26mm dellorto settings
Posted: Mon Jun 20, 2016 5:23 pmI had lots of fun (not) jetting mine, run thru drilled & hollowed out airbox, side panel compressed carb rubber due to NOT using a Broady carb rubber, during a recent re-build I managed to take another 3/5mm off the manifold, hence pushing the rubber back a smudging further.
Re: 26mm dellorto settings
Posted: Mon Jun 27, 2016 4:13 pmWhat is a Broady carb rubber?
I have a problem with my air intake rubber fouling on the side panel.
I have a problem with my air intake rubber fouling on the side panel.
Re: 26mm dellorto settings
Posted: Mon Jul 04, 2016 6:26 pmthe rubber that holds the carb onto the manifold, its about 10mm shorter than the VE one I originally used