Page 1 of 1
Return of the Jetex
Posted:
Tue Feb 14, 2017 8:28 pmby P D: SC Chester
After throwing away the top for my Mikuni by accident, or more correctly- stupidity. I've had to re fit my old 22mm jetex. The problem I seem to have is excess fuel spit back. I don't recall it doing this previously and the main is 118 with a 50 and (atomizer??).
Does it sound like the float is sticking open? It also runs like a bag of crap, and will only tick over with a lot of revs.
Any ideas chaps?
Cheers
Re: Return of the Jetex
Posted:
Wed Feb 15, 2017 10:09 amby EddieStone
Check the slide is the right one
Re: Return of the Jetex
Posted:
Wed Feb 15, 2017 6:49 pmby St George
There are loads of threads on this. I fitted Delly jets to mine and ran a small drill through the float.
Re: Return of the Jetex
Posted:
Thu Feb 16, 2017 7:00 amby Toddy
St George wrote:There are loads of threads on this. I fitted Delly jets to mine and ran a small drill through the float.
Agree if you type in Jettex in the search option there are quite a few threads
Re: Return of the Jetex
Posted:
Fri Feb 17, 2017 12:05 amby P D: SC Chester
My eBay 15.99 Mikuni carb arrived today, fired up second kick and ticks over great.
It's a 28mm and probably a copy, but it sure makes a difference compared to the medieval Jetex.