Page 1 of 1

GT 200 30mm dellorto / BGM

PostPosted: Mon Mar 20, 2017 12:05 pm
by compass
Hi Guys , running above with following..
130 main
55 pilot
AV 268
X13 2nd clip down

Runs absolutely fine when revved past quarter throttle, however around quarter throttle its very boggy and rich.

Should I move clip?
Anyone else running the same?

Cheers 8-)

Re: GT 200 30mm dellorto / BGM

PostPosted: Mon Mar 20, 2017 8:11 pm
by coaster
Have tried lowering the needle?

Re: GT 200 30mm dellorto / BGM

PostPosted: Mon Mar 20, 2017 8:23 pm
by Donnie
Cetainly sounds like you need to lower the needle, ie top clip and see.
If it's still boggy you may either want to try an x7 (slightly weaker needle) with the AV268, or go to a AV266 atomiser and stick with the x13

Re: GT 200 30mm dellorto / BGM

PostPosted: Mon Mar 20, 2017 10:31 pm
by compass
Will try lowering the needle at weekend and will let you know.

Re: GT 200 30mm dellorto / BGM

PostPosted: Tue Mar 21, 2017 2:06 pm
by swissdean
coaster wrote:Have tried lowering the needle?

+1 had same, raised clip to top and all fine