GP exhaust grounding

[brumtony]

I have a TSR on my quattrini GP , grounding on right handers any suggestions of another system which might allow me to tip it in more ??
Thanks in advance

[Solid Air]

The CST10 doesn't have much clearance either I afraid.

[nickw]

Rimini do this exhaust which sits higher up.
https://www.riminilambrettacentre.com/e ... a-ecc.html

I had one on my TS1 and it didn't noticeably change the performance from the previously fitted TSR.

[Dazts1]

Hi tony what rear shock you using ? If you using something short like an R1 or something around 285 /290 this will cause the exhaust to sit lower at the front. If you have clearance on your inlet manifold which could be aided by offset cones or Casa setup , this will allow for fitment of a longer rear shock. 305 to 310 mm could be achievable this will give more clearance on your pipe up front. Before spending money on a shock see if someone you know has one you can try , see if you have plenty of manifold clearance. This will definitely help.