Anyone used GP150 box with 17/46 to get 5.0 FD
5.0 is the recommended, this over an LI 150 with 16/47 which I don't have...
Ive got all the parts and wanted to use them up
Just wondered what it would be like through the gears...
Cheers
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
Monza 200 gearing
3 posts
• Page 1 of 1
Monza 200 gearing
by gaz_powell » Thu Jul 09, 2026 5:06 pm
- gaz_powell
- Posts: 3508
- Joined: Sat May 31, 2014 7:56 pm
- Location: Hartlepool
Re: Monza 200 gearing
by dickie » Fri Jul 10, 2026 9:03 am
I used that gearing on a home tuned 175 i built a few years back. It was acceptable and nothing more.
That was with a bgm v3 clubman.
I swapped the pipe for an old expansion that mick Abbey had lying around and it became almost unusable. The big jump from 3 to 4 was too much unless going downhill with a tailwind
That was with a bgm v3 clubman.
I swapped the pipe for an old expansion that mick Abbey had lying around and it became almost unusable. The big jump from 3 to 4 was too much unless going downhill with a tailwind
- dickie
- Posts: 1913
- Joined: Thu Oct 02, 2014 12:32 pm
- Location: Tyne and Wear
Re: Monza 200 gearing
by gaz_powell » Sun Jul 12, 2026 6:39 pm
Cheers Rich.... GP150 box stays in the box then.. I'll get a SIL200
- gaz_powell
- Posts: 3508
- Joined: Sat May 31, 2014 7:56 pm
- Location: Hartlepool
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 11 guests