LCGB Forums

To cut a long story short, they don’t work together, which is disappointing.

Coaster suggested this was the case in a post somewhere (I can’t find it at the moment).

Currently debating whether to put the Mtech up for sale.

******** READ TO THE END FOR A HAPPY ENDING ************

And neither do Agusto but Anthony did say that at the outset.

Kytronik works fine with external pick up.

Thanks Dickie.

That was probably what I thought I was purchasing when I bought the MTech.

That's the problem with me, my brain isn't what it used to be. I have problems trying to remember whether I bought something at Lidl or Aldi, so there isn't much chance of remembering whether I was supposed to buy MTech or Kytronic.

Who sells the Kytronic?

Knowledge wrote:Thanks Dickie.

That was probably what I thought I was purchasing when I bought the MTech.

That's the problem with me, my brain isn't what it used to be. I have problems trying to remember whether I bought something at Lidl or Aldi, so there isn't much chance of remembering whether I was supposed to buy MTech or Kytronic.

Who sells the Kytronic?

Martin , MB i believe are the main dealer but others sell them

Bought my kytronic direct from the designer.web search kytronic it comes up.
Regards Super

Break-through. It works.

The Mtech WILL work with Scootronics external pick-up. I have done it.

Anthony suggested reducing the air gap between the trigger and the external pick-up to 0.5mm and it works fine. My air ap was 1.6mm, so no wonder it failed to rev-out.

A good news story. Oh, and the Mtech does the trick to the motor.

Knowledge wrote:Break-through. It works.

The Mtech WILL work with Scootronics external pick-up. I have done it.

Anthony suggested reducing the air gap between the trigger and the external pick-up to 0.5mm and it works fine. My air ap was 1.6mm, so no wonder it failed to rev-out.

A good news story. Oh, and the Mtech does the trick to the motor.

Thats interesting Martin, just need to find where I threw mine

So will the Augusto work by reducing air gap???

Norrie,

It would be worth a try. Report back with your findings.

Martin