Page 1 of 1
TS1 gearing
Posted:
Sat May 23, 2020 5:53 pmby Sixpennyblue
I have recently brought a gp200 with a ts1 225, it is fine in the first 3 gears but will not pull 4th, i am running it with a jl3 and 30mm carb. Checked the gearing and it has an LI150 gearbox with 18 - 47 sprockets. Should I change to 16 or 17 front or I do have a spare 46 rear sprocket Any advise would be welcome. Thanks
Re: TS1 gearing
Posted:
Sat May 23, 2020 7:30 pmby martyn dwane
that gearing and sprocket combination gives a top gear ratio of 4.44 ,Af recomend anywhere between 4.7 to 5.3 depending on exhaust .
google Gearbox visuliser By Avatone , you can imput different sprocket combo`s on any chosen gearbox.
Incidently AF recomend 4.7 with a JL3 exhaust , which you could achieve with a 17 tooth front sprocket.
Re: TS1 gearing
Posted:
Sun May 24, 2020 1:40 pmby dscscotty
4.7 =47x17 46x17=4.6
Re: TS1 gearing
Posted:
Mon May 25, 2020 11:51 amby ULC Soulagent
Go 16/46 giving a nice 4.9 fd with ur Jl3 and carb
Re: TS1 gearing
Posted:
Tue May 26, 2020 12:15 pmby Feersum Injun
Mine is set up with 47x17 (4.7) with 110/60 crank and JL3 pipe. Good set up for me... decent pull through the gears and sits nicely in 4th on the road. Not that happy on some sharp hills though! 28mm delly as well...