LCGB Forums

I have an RT225 non-reed valve engine
with a 107x58 crankshaft,with a ex-box clubman exhaust.What I would like to know is-
The main jet
The pilot jet
The atomizer
The needle
and which notch to put the needle on

What carburetor?

Sorry.Its a 28mm dellorto(PHBH)

What slide?

Its a 40

Loads of Jetting specs on the BGM RT195 / RT225 page on Facebook

Appreciate that FB isnt everyones cup of tea - but there are some specific pages which are really useful. The Quatrini page is good for specs too

HxPaul wrote:I have an RT225 non-reed valve engine
with a 107x58 crankshaft,with a ex-box clubman exhaust.What I would like to know is-
The main jet
The pilot jet
The atomizer
The needle
and which notch to put the needle on

My RT225 set up with 30PHBH & BGM clubman as follows:
Main jet 122
Pilot jet 55
Atomiser AV266
Needle x13 on top clip
Slide 45
Breath sweet foam filter
Static timing at 17 degs

hope that's of some help to you