Page 1 of 1

Franspeed Super Tourer ?

PostPosted: Thu Jun 10, 2021 10:35 am
by Lockman69
Can anybody please tell the Rev range for the Franspeed Super Tourer....I've had one on my TS1 and it suites my tune, but its had it and needs replacing, Andy Francis is not very optimistic that they will be available anytime soon if at all :( :!: ...So what exhaust would have similar characteristics to the super tourer...anyone ?

Cheers

Re: Franspeed Super Tourer ?

PostPosted: Thu Jun 10, 2021 10:54 am
by Marrsy7
I got a JL supertourer from beedspeed a couple of months ago

Re: Franspeed Super Tourer ?

PostPosted: Thu Jun 10, 2021 4:05 pm
by Norrie Bodge
Lockman69 wrote:Can anybody please tell the Rev range for the Franspeed Super Tourer....I've had one on my TS1 and it suites my tune, but its had it and needs replacing, Andy Francis is not very optimistic that they will be available anytime soon if at all :( :!: ...So what exhaust would have similar characteristics to the super tourer...anyone ?

Cheers


Get in touch with Oliver Lomas
He sorted me out recently m8 with a SuperTourer

info@jl-exhausts.com

Re: Franspeed Super Tourer ?

PostPosted: Fri Jun 11, 2021 10:05 am
by Lockman69
Cheer Guys

I am going to try the CST5 :roll:

Re: Franspeed Super Tourer ?

PostPosted: Fri Jun 11, 2021 3:14 pm
by hullygully
mine was about 8000 rpm -ish on the stand

Re: Franspeed Super Tourer ?

PostPosted: Sat Jun 12, 2021 5:52 pm
by corrado
Lockman69 wrote:Cheer Guys

I am going to try the CST5 :roll:


According to Chis. CST5

This exhaust suit those who like to drive hard and are not adversed to making their engine sing. With this exhaust your maximum BHP and torque is higher up the RPM with the exhaust finishing its usable power around the 5500 to 9000 RPM range depending on your barrel.

As opposed to the CST3.

The maximum torque and power is seen at low RPM and is held up until the end of RPM range of this exhaust which is around 4000 to 7500 RPM depending on your barrel. The exhaust is the perfect balance between good horsepower and maximum torque.