LCGB Forums

A mate is looking to restore a DJ190 engine and wants to fit the original DJ pipe with the mini-muffler for the end of his pipe.

Does anyone have a muffler (or whole pipe) they might wish to sell, or some photos or some dimensions they could share?

Thanks

I had a dj exhaust in the 80's and from my memory there wasn't an end can as such it was a tube welded to the expansion chamber with the baffle tube held in with a circlip like the old frescos

Now you mention it, this is how I recall them back in the day. My mate certainly mentioned that the silencing gubbins was held-in by a circlip

SSC DJ copy..... Same but a bit different

https://www.ebay.co.uk/itm/184938624263

Those are the Mk2 copy, sorry

Martin I had am early DJ pipe circa 82 on my skelly. The one in the Ebay link is a later version.
I believe the early ones used the same VW muffler as on the AF reverse cone clamped on.

my DJ pipe was exactly as steveg has mentioned

Thanks for the replies guys. I will pass the info onto Si Barber.

Old fresco body with tailpipe out of my reverse cone clubman.