Page 1 of 1
Quattrini 210
Posted:
Sat Aug 31, 2024 9:45 amby tommy200184
Hello everybody,
I'm going to build a Quattrini 210 engine. I've got the pm fat mamba exhaust. I'm wondering what would be the best gear box set up. I think I will use a 5 speed gear box from AF. Wich one should I buy? The Close Ratio 34 teeth or the Close Ratio 35 teeth? And wich sprockets to use? 17x46 ?
Sorry for my english, I'm french.
Re: Quattrini 210
Posted:
Sat Aug 31, 2024 10:41 pmby Fast n Furious
With this engine I'd be looking for a good spread of power from 7k -8.5k with the Mamba. So, a 19/34 on the 5th with a 17/46 on the primary should work out ok but it depends on other factors as well including how you want it to ride. If you find this setup to be slightly undergeared, then a simple, easy and cheap upgrade to a 18T front sprocket may be all that is needed.
Re: Quattrini 210
Posted:
Sun Sep 01, 2024 1:46 pmby tommy200184
Ok, thank you for your answer
Re: Quattrini 210
Posted:
Tue Sep 03, 2024 11:36 amby Knowledge
If you choose the wrong fifth gear, don't worry, you can still buy the alternative fifth gear from AF, as a I did.
Your English is good.
Re: Quattrini 210
Posted:
Wed Sep 04, 2024 8:55 pmby Toddy
Does the pm pipe fit the quattrini ?
Re: Quattrini 210
Posted:
Fri Sep 06, 2024 4:19 pmby missing lynx
Is your fat mamba pipe specifically for the Quattrini? As if not will need quite a bit of work to fit
Re: Quattrini 210
Posted:
Sat Sep 07, 2024 9:35 amby tommy200184
Is the Af close ratio a good choice, or the casa cyclone 5 would be better?
Re: Quattrini 210
Posted:
Tue Sep 10, 2024 12:18 pmby ULC Soulagent
tommy200184 wrote:Is the Af close ratio a good choice, or the casa cyclone 5 would be better?
How deep are ur pockets?
As previously posted is the pm pipe actually made for the Quatt?
Re: Quattrini 210
Posted:
Tue Sep 10, 2024 4:37 pmby tommy200184
Yes the pm pipe is actually made for the Quattrini.