LCGB Forums

hi peeps
would some of you guys post pics of what you are using and how you have mounted the gauge and installed the plumbing.
ta very much

My EGT gauge is going to be mounted in the top of my new inside legshield toolbox, Cables tied underneath the frame & brought up behind the horncast, then a small hole drilled in the legshield & the wiring brought through.

mainstand wrote:My EGT gauge is going to be mounted in the top of my new inside legshield toolbox, Cables tied underneath the frame & brought up behind the horncast, then a small hole drilled in the legshield & the wiring brought through.

I used the same technique for plumbing.... mounted in different ways on my GP and S2, and different guages.

GP using a standard instrument pod....


S2 mounted on a home made bracket to top horncast screw....

Hi,
I was thinking of fitting one to engine. What are the best types, prices and availability and where to buy from etc.
Many thanks.

There can be only one....http://www.gammatechnology.co.uk/index.html

Thanks.
Looks like I'll get the RT 1000. Is that most people use?

thanks guys for all the info so far

hi guys
has anyone got pics of fitting and routing details of the sensor from the exhaust pipe just to give me some idea what to do, ta