Page 1 of 1
EGT sensor location
Posted:
Wed Apr 22, 2015 10:03 amby mark1
I'm fitting an EGT but the instructions don't tell you where to locate the sensor, it just says "from the specified distance from the piston skirt" But doesn't actually say how far. I've done a search and can't find anything.
The sensor is a Gammatech and I'm fitting it to a franspeed with an Avanti top end.
Does anyone know how far it should be?
Re: EGT sensor location
Posted:
Wed Apr 22, 2015 11:52 amby Lockman69
100mm from the skirt
Re: EGT sensor location
Posted:
Wed Apr 22, 2015 1:11 pmby coaster
That's 100mm..ish, you'll need to be a bit flexible as 100mm puts it right on the first bend and with the Franspeed, close to the spring locating loops. A few mm either way won't matter as the temps will be unique to your engine anyway.
Re: EGT sensor location
Posted:
Wed Apr 22, 2015 3:48 pmby hullygully
exactermondo
Re: EGT sensor location
Posted:
Thu Apr 23, 2015 12:30 pmby foremanbob
Oh and dont fit it on the exposed splash guard side of the pipe, as this can cause variations in the readings
Re: EGT sensor location
Posted:
Fri Apr 24, 2015 12:13 pmby mark1
Chhers chaps, fitted it last night. It works a treat.