LCGB Forums

Built/tuned another GT250,

love the feeling when a motor bursts into life for the first time!
picks up well and spits nothing from the carb mouth

Sounds spot on, is that with the ne GT crank?

Colin

Very nice

coaster wrote:Sounds spot on, is that with the ne GT crank?

Colin

no, I started gathering bits for this motor a while ago before the GT prototype cranks arrived.
Crank is the same as the one in the GT250 in my Winter. AF black 60 webs with RD115 rod and eccentric pin.

its got some big ports, and some nice things inside


















wish it was mine tbh

Looking good . G. PM'd you.

Here we go ...
Very nice Eden.

How come the Porc head appears to have been taken down at the edge of the gasket face on one side?

Edited: Have you had to remove/lap that much to set squish?

Heads resessed so that I can run the piston right to the top of the barrel to get the transfer timing I wanted. So yes its to get a good squish.

what size bore does this kit use eden?

joespeed wrote:what size bore does this kit use eden?

this is 71mm