Page 1 of 1
Stainless exhaust
Posted:
Tue Nov 22, 2016 9:46 amby Cellardyke
Pros and cons on using stainless exhaust ? Any advice or experiences on using scootrs stainless exhaust would be appreciated
Re: Stainless exhaust
Posted:
Tue Nov 22, 2016 10:26 amby CHRIS in MARGATE
Had mine on for 6 years or so. Been good. Still looks new. Had to re-rivet end can couple of years back. I discarded the rubber mountings and bolted straight on but NOT under any tension after altering mounting holes on support bracket. Flywheel side downpipe nut difficult to get good access to due to design. Shaped a tight open ended spanner and use this with 3 or 4 others to get tight.
Overall pleased.
Re: Stainless exhaust
Posted:
Tue Nov 22, 2016 10:41 amby Cellardyke
Chris,
What are you riding ? I've a series 2 and wondered how much trimming I will have to do around footboards..
Cheers for the response.
Re: Stainless exhaust
Posted:
Tue Nov 22, 2016 6:39 pmby CHRIS in MARGATE
Series 3 Special. Needed to cut a small oval at the rear of rear running board. You can see it here on my avatar.
Re: Stainless exhaust
Posted:
Wed Nov 23, 2016 10:39 amby Cellardyke
Cheers Chris... In sunny Margate