Just building an engine for a mate and he has bought a franspeed tourer - i'm not familiar with these pipes.
Motor is a stage 4 200, with 30mm phbh, SIL GP 200 box, got a selection of back and front sprockets, just wondering what final drive I should be looking for?
Rider is about 12 stone and only ever rides one up.
Just finished it tonight up to point of needing to put sprockets in
Will ring Andy Francis tomorrow
Cheers
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
franspeed tourer pipe
4 posts
• Page 1 of 1
franspeed tourer pipe
by gaz_powell » Wed Apr 26, 2017 9:49 pm
- gaz_powell
- Posts: 3345
- Joined: Sat May 31, 2014 7:56 pm
- Location: Hartlepool
Re: franspeed tourer pipe
by Rich Oswald » Thu Apr 27, 2017 10:54 am
hullygully wrote:47t x 19t
Yep, possibly even 19/46, light rider?
Rich'
-
Rich Oswald - Posts: 9514
- Joined: Fri May 30, 2014 3:30 pm
- Location: Wiseman From The East (East Of The Pennines That Is)
Re: franspeed tourer pipe
by gaz_powell » Thu Apr 27, 2017 1:44 pm
Thanks Gents
Spoke to Andy Francis and he suggested 18/47 - but it might pull 19/47 depending on rider, style of riding etc
I`ll start at 18/47 as ive got a brand new 82 chain
Gaz
Spoke to Andy Francis and he suggested 18/47 - but it might pull 19/47 depending on rider, style of riding etc
I`ll start at 18/47 as ive got a brand new 82 chain
Gaz
- gaz_powell
- Posts: 3345
- Joined: Sat May 31, 2014 7:56 pm
- Location: Hartlepool
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 25 guests