Page 1 of 1
GP taper lightened Flywheel off the shelf
Posted:
Sun Apr 30, 2017 9:09 pmby berniek
Hi all, just putting an engine together for someone for the euro. Their previous flywheel is 2.8 kg and I'm looking for about 2.0 kg. I know I can get lightened, and a few offer this service. What I'm after is advice on what is available off the shelf to go with a "standard" electronic type stator (not variotronic or casatronic stators). Who sells off the shelf, and are they modified Indian or something different? Thanks
Re: GP taper lightened Flywheel off the shelf
Posted:
Sun Apr 30, 2017 10:17 pmby steve c
beedspeed did them, they just turned material off the diameter in rings from indian flywheels beware of elmec dark grey paint unless with a matching stator
sil are better but you can still have trouble matching pick up height between parts,
Re: GP taper lightened Flywheel off the shelf
Posted:
Sun Apr 30, 2017 11:23 pmby dscscotty
Send it up here Bernie, we'll machine it and weld cam?
Re: GP taper lightened Flywheel off the shelf
Posted:
Tue May 02, 2017 5:05 pmby Fast n Furious
AF do a machined down indian flywheel both the short and long finned type. I think they call it a "midrange weight". They weigh circa 1.8kilo's. They are not re-balanced though.
Re: GP taper lightened Flywheel off the shelf
Posted:
Tue May 02, 2017 7:10 pmby gaz_powell
Bernie if a genuine SIL send it to Scotty for lightening and welding - defo worth it