LCGB Forums

Posted: **Sun Oct 15, 2017 9:08 pm**

Please could someone confirm if the inlet stud spacing on this kit is the same as a normal 200 cylinder or that of a 150?
Thanks

Posted: **Mon Oct 16, 2017 7:46 am**

Gori do produce a 200 kit for the small block and I am not aware that they do one for the large block........if that helps. Cam-Lam and Rimini have more info'

Posted: **Mon Oct 16, 2017 8:50 am**

Sorry, I meant the inlet stud spacing on the small block 200 kit.

Posted: **Mon Oct 16, 2017 6:31 pm**

the small block Gori 200 kit's inlet manifold has 200c/c stud spacings, I can confirm 8-)

plus, beware that the barrel's being top & tailed, so also be warey when doin squish clearances, think I used RB20 head gaskets totalling 2.5mm!!!!!!!!!!!

Posted: **Mon Oct 16, 2017 8:00 pm**

Thanks, was that a 2.5 head gasket when running 58x107 crank?

Posted: **Tue Oct 17, 2017 6:33 pm**

it was yes, I changed their head after several piston / head coming togethers, I ended up using a gt porcupine one, but still be carefull

Posted: **Wed Oct 18, 2017 8:42 pm**

Cheers mate, I’ll double check the squish

LCGB Forums

Gori 200 kit

Gori 200 kit

Re: Gori 200 kit

Re: Gori 200 kit

Re: Gori 200 kit

Re: Gori 200 kit

Re: Gori 200 kit

Re: Gori 200 kit