Body parts

[gazzar15]

Finished but not quite my series 3LI now a 175....Happy generally with the result engines runs well, thanks to a good rebuild job carried out by Harry Barlow, rear end and panels look good...less than happy with the front end .
I re used the mud guard and leg shields both a bit bent and battered but look ok ish with paint but having seen the work put in to some of the scoots at the Southport rally I really need to go the full hit,bite the bullet and get some new/better bits for the front end.
Question is from where .....is the Vietnamese stuff any good? Are there any suitable pattern parts available?
Need some direction please ladies and gents.

[Storkfoot]

Get someone to recommend a decent local panel beater. Certainly, they should be able to sort the legshields unless they are rusted badly. Front mudguards are harder to sort if the scooter has been in a front end shunt but there are lots of decent remakes around.

[Toddy]

Ive used some of Antonys stuff at Buzzsolomoto Always fitted well and good quality

[northernpete]

try Chris @ GRP Fibreglass Parts and Mark Hodgkinson @ Lambretta & Vespa Fibre Future...
https://www.facebook.com/groups/1813429408940760/
https://www.facebook.com/groups/536832233145636/