LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
Carb jetting
6 posts
• Page 1 of 1
Carb jetting
by Nbowe » Thu Aug 06, 2015 12:50 pm
Any suggestions on starting point for jetting a 24mm dellorto carb on a standard gp200 engine with standard clubman exhaust.I know they all vary but just a rough idea on what size jets to make a start.cheers
- Nbowe
- Posts: 46
- Joined: Fri Mar 06, 2015 10:02 am
Re: Carb jetting
by burnside » Fri Aug 07, 2015 2:45 pm
Can't be of any help here but interested to know why you chose a 24mm Dellorto? I don't know anyone who runs this size carb, most either use 22mm or 25mm if wanting to retain the air box.
-
burnside - Posts: 988
- Joined: Mon Jun 09, 2014 10:39 pm
- Location: Flying 8 Balls - Norwich
Re: Carb jetting
by Nbowe » Fri Aug 07, 2015 10:07 pm
It's the carb that was on my gp150 .I have replaced the engine with a gp200
- Nbowe
- Posts: 46
- Joined: Fri Mar 06, 2015 10:02 am
Re: Carb jetting
by rossclark » Sat Aug 08, 2015 12:20 am
-
rossclark - Posts: 2855
- Joined: Fri May 30, 2014 11:23 pm
- Location: Lanarkshire
Re: Carb jetting
by weeks » Sat Aug 08, 2015 10:43 am
rossclark wrote:http://scooterotica.org/forum/viewtopic.php?f=9&t=14
Take a look at Rossclark link or do a search here .................. Im pretty certain you will find some starting point.
For the record any link to other scootering / technical forums that may help and assist LCGB members has allows been welcomed.
Cheers
-
weeks - Posts: 1118
- Joined: Tue May 13, 2014 10:07 pm
- Location: Darlington
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 31 guests