LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Bgm pro clubman v4

Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models

Bgm pro clubman v4

Postby aby » Fri Jan 29, 2021 9:28 pm

Heard a rumour today that there may be an upgrade to the BGM pro clubman v4 to iron out power loss higher up the gears. Anybody know if its true as I am looking for a good exhaust for my Casa 185 upgrade, Casa recommend 42mm clubman and 25mm Dellorto but as its been out a while I was wondering if any thing better had come out.
I noticed there was a simular question asked but after I heard the rumour today though I would put it out there again.
aby
 
Posts: 20
Joined: Fri Aug 23, 2019 4:42 pm

Re: Bgm pro clubman v4

Postby vegansydney » Sat Jan 30, 2021 1:00 am

The new BGM Clubman has moved from the prototype stage and into production, but as of yet (according to SCK) there is no confirmed date for release. Before you get excited, it's not aimed at replacing the V4, but as an addition to the range, as it's specifically designed for high revving kits and comes with a muffler. There is plenty of info, including video, photos and dynograph etc.. over on the GSF.
User avatar
vegansydney
 
Posts: 275
Joined: Wed Aug 07, 2019 2:38 pm
Location: New York City

Re: Bgm pro clubman v4

Postby Rich Oswald » Sat Jan 30, 2021 1:05 pm

I'd heard it was going to be a Straight Through (ST) box with an end can similar to the Ron Moss.

Rich'
User avatar
Rich Oswald
 
Posts: 9518
Joined: Fri May 30, 2014 3:30 pm
Location: Wiseman From The East (East Of The Pennines That Is)

Re: Bgm pro clubman v4

Postby Rich Oswald » Sat Jan 30, 2021 1:06 pm

vegansydney wrote:The new BGM Clubman has moved from the prototype stage and into production, but as of yet (according to SCK) there is no confirmed date for release. Before you get excited, it's not aimed at replacing the V4, but as an addition to the range, as it's specifically designed for high revving kits and comes with a muffler. There is plenty of info, including video, photos and dynograph etc.. over on the GSF.


What's GSF?

EDIT

I know now, German Scooter Forum.
User avatar
Rich Oswald
 
Posts: 9518
Joined: Fri May 30, 2014 3:30 pm
Location: Wiseman From The East (East Of The Pennines That Is)

Re: Bgm pro clubman v4

Postby ULC Soulagent » Sat Jan 30, 2021 1:21 pm

Bit more info on the pipe, probably many people have seen this already
https://blog.scooter-center.com/en/lamb ... vs-bigbox/
User avatar
ULC Soulagent
 
Posts: 2167
Joined: Sun Apr 03, 2016 3:26 pm
Location: Milton Keynes

Re: Bgm pro clubman v4

Postby Rich Oswald » Sat Jan 30, 2021 3:05 pm

ULC Soulagent wrote:Bit more info on the pipe, probably many people have seen this already
https://blog.scooter-center.com/en/lamb ... vs-bigbox/


Well if that's how the end can is going to look, upswept and over the kickstart, then you might as well get an expansion because the box doesn't give the standard look anymore. I don't like that one bit compared to the Ron Moss ST and end can. Oh and no tailpipe clamp either!

Rich'
User avatar
Rich Oswald
 
Posts: 9518
Joined: Fri May 30, 2014 3:30 pm
Location: Wiseman From The East (East Of The Pennines That Is)

Re: Bgm pro clubman v4

Postby aby » Sat Jan 30, 2021 6:05 pm

ULC Soulagent wrote:Bit more info on the pipe, probably many people have seen this already
https://blog.scooter-center.com/en/lamb ... vs-bigbox/


So basically not enough grunt in a casa 185 upgrade fir it and should probably stick to the v4 clubman for more even ride through the gears
aby
 
Posts: 20
Joined: Fri Aug 23, 2019 4:42 pm

Re: Bgm pro clubman v4

Postby ULC Soulagent » Sun Jan 31, 2021 9:50 am

Rich Oswald wrote:
ULC Soulagent wrote:Bit more info on the pipe, probably many people have seen this already
https://blog.scooter-center.com/en/lamb ... vs-bigbox/


Well if that's how the end can is going to look, upswept and over the kickstart, then you might as well get an expansion because the box doesn't give the standard look anymore. I don't like that one bit compared to the Ron Moss ST and end can. Oh and no tailpipe clamp either!

Rich'

That’s just the prototype Rich from last year,It may or may not have changed although time will tell but I do agree with you that it sorts of defeats the standard clubman layout looking more like a VW type pipe with endcan. :?
User avatar
ULC Soulagent
 
Posts: 2167
Joined: Sun Apr 03, 2016 3:26 pm
Location: Milton Keynes

Re: Bgm pro clubman v4

Postby ULC Soulagent » Sun Jan 31, 2021 9:52 am

aby wrote:
ULC Soulagent wrote:Bit more info on the pipe, probably many people have seen this already
https://blog.scooter-center.com/en/lamb ... vs-bigbox/


So basically not enough grunt in a casa 185 upgrade fir it and should probably stick to the v4 clubman for more even ride through the gears

More or less as it was designed for the big bores 225+ cc
User avatar
ULC Soulagent
 
Posts: 2167
Joined: Sun Apr 03, 2016 3:26 pm
Location: Milton Keynes


Return to Series 1, 2 & 3

Who is online

Users browsing this forum: No registered users and 16 guests