Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models
by GoonerKev » Wed Jun 02, 2021 9:55 pm
Want to put a inside legshield spare wheel holder on, but the one I have mostly seen are the ones for the Horncast screws & top Mudguard screws, trouble is I can't find the horncast screw location as it's been filled in by previous owner, is there a way to find them without damaging too much of the paintwork.
Kev

-

GoonerKev
-
- Posts: 29
- Joined: Mon Oct 26, 2020 10:26 am
by nickw » Thu Jun 03, 2021 9:48 am
Lol I thought this was an introduction to a new porn film.
I would use the rack to help pinpoint the holes. I can see one in your picture. Why were they filled though and how are you going to get the horncast repaired if the holes have been filled to keep horncast in place due to poor threads.
-
nickw
-
- Posts: 675
- Joined: Sat Jun 07, 2014 10:44 am
- Location: Chesterfield
by landybretta » Thu Jun 03, 2021 11:38 am
I much prefer the hook over type at the top with screw fittings for either the bottom horn cast screws or the top mudguard screws. Both types are available.
-

landybretta
-
- Posts: 730
- Joined: Thu Jun 05, 2014 10:22 pm
by missing lynx » Thu Jun 03, 2021 11:42 am
They maybe more obvious from the other side. I wouldn't rely on the rack as I've never found one that doesn't need bending to fit. I'm more curious as to why they've been filled, but us Lambretta bodges do some strange things in the heat of the moment lol
-
missing lynx
-
- Posts: 882
- Joined: Wed Nov 26, 2014 5:14 pm
by missing lynx » Thu Jun 03, 2021 11:46 am
Just realised what Scooter it is doh! If it originally had a fibreglass horn cast it wouldn't have bottom fixings but there should still be the pressing marks
-
missing lynx
-
- Posts: 882
- Joined: Wed Nov 26, 2014 5:14 pm
by GoonerKev » Fri Jun 04, 2021 8:16 am
nickw wrote:Lol I thought this was an introduction to a new porn film.
I would use the rack to help pinpoint the holes. I can see one in your picture. Why were they filled though and how are you going to get the horncast repaired if the holes have been filled to keep horncast in place due to poor threads.
Thats how it was when I bought it
-

GoonerKev
-
- Posts: 29
- Joined: Mon Oct 26, 2020 10:26 am
by GoonerKev » Fri Jun 04, 2021 8:17 am
landybretta wrote:I much prefer the hook over type at the top with screw fittings for either the bottom horn cast screws or the top mudguard screws. Both types are available.
Yep, I have purchased one now, thank you
-

GoonerKev
-
- Posts: 29
- Joined: Mon Oct 26, 2020 10:26 am
by GoonerKev » Fri Jun 04, 2021 8:18 am
missing lynx wrote:Just realised what Scooter it is doh! If it originally had a fibreglass horn cast it wouldn't have bottom fixings but there should still be the pressing marks
your right it is a fibreglass Horncast
-

GoonerKev
-
- Posts: 29
- Joined: Mon Oct 26, 2020 10:26 am
Return to Series 1, 2 & 3
Who is online
Users browsing this forum: Bing [Bot] and 32 guests