LCGB Forums

by **dave411** » Sun Nov 16, 2014 1:10 pm

Hi all,does anyone run a 26mm Dellorto with a Mugello 198?
I have a remote filter,and will be using an Ancilloti exhaust.
Ball park jet settings?
Thanks.

by **stonerosesmod** » Sun Nov 16, 2014 3:27 pm

Hi,
Ran mine with

53 Pilot
AV266
X2 Needle on 2nd clip
115 Main

Ran fine with this with the Ancillotti

Neil.

by **dave411** » Sun Nov 16, 2014 4:36 pm

Thanks Neil,they are way off what came in the carb.

by **dave411** » Sun Nov 16, 2014 4:40 pm

When you refer to the second clip,is that from the top down,or the bottom up?

by **stonerosesmod** » Sun Nov 16, 2014 4:44 pm

2nd down from the top mate.Just do a plug colour check at cruising speed and again at over 3/4 to check the main jet

by **dave411** » Mon Nov 17, 2014 5:18 pm

Will do,but not quite yet,havent built the engine yet.One thing though,the main jet in my carb is onle a 100,smaller than the one you are using.

by **stonerosesmod** » Mon Nov 17, 2014 10:37 pm

Always start rich and work your way down to a safe looking plug.Id start off with at least a 110 main with the Ancillotti as every scooter is different

LCGB Forums

Mugello 198

Mugello 198

Re: Mugello 198

Re: Mugello 198

Re: Mugello 198

Re: Mugello 198

Re: Mugello 198

Re: Mugello 198

Who is online