LD ish

[gerryjunior]

Hello , just wanted to share some pics of my latest scoot,i built it just before the four nations last year, its a gp frame with ld loop , late indian forks, disc brake etc,,mugello 225 with a reverse muffler gori
somebody had butchered an early LD and tried to fit an auto , i had an indian gp bar sitting there so i thought why not....
this is how i bought it .
then i put the two together..
[

[jonno]

Love it

[Mr G in NYC]

Great.... looks like a blast !! G.

[trev t]

pure sex...love love love it...

[Rich Oswald]

Yeh, love that!

Rich'

[gerryjunior]

thanks for the comments,,i treated it to some bling,,a new jl pipe.

[gerryjunior]

the forks were very soft , so i search ebay and found a rear moped shock that fitted after a bit of adjusting, they have changed the late indian forks a treat ,

[gerryjunior]

the shocks were very soft , so i search ebay and found a rear moped shock that fitted after a bit of adjusting, they have changed the late indian forks a treat ,

[gerryjunior]

ive also built an engine for it its an old mb 240 with a kawazaki piston big old reed manifold , rd 350 reeds and a 34 mil amal the carb sticks out a bit so i had to trim the panel , should be fun , not sure how lont it will last ,

[petemaisey]

I love it's brutal looks.

Pete

[Noddabodder]

Love what you're doing with this Gav, excellent!!!

[gerryjunior]

Thanks for the reply's , its a bit of fun.

[Toddy]

Cracking job

[bike grim]

Looks great, a real Ratrod with that pokey motor

[gerryjunior]

took it for a spin over the hills today, weather was lovely, engine running good so far ,

[carlos fandango]

Looking Great Gerryjunior ,
im deciding whether to cut the loop on mine an fit an inline spare wheel ??

[gerryjunior]

funny you should mention it , i was thinking of removing the inline spare wheel and fitting an ld toolbox, no where to put my 2 stroke is a pain. why do you need to cut the loop , is it to make a tidy recess?

[Mr G in NYC]

Like that AA++ G.

[carlos fandango]

Ive fitted an LD toolbox , mainly to house the ign switch and dip switch. They are tiny , you wont get a 1 ltr bottle of oil in , maybe a 1/2 ltr one ?

If i cut the loop ( where you would normally cut the tool box door on an S1/2/3 ) my tyre will sit on the floor and ill be able to open the tool box door , and it will hold the tyre upright ...hopefully

[gerryjunior]

fitted an LD toolbox to this, and a sip digital speedo,