LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

26mm jetex jetting problems

Want to know which carb to choose? Having problems setting up the jetting details on your scooter? Wheter you are using a standard or tuned carb, ask your question here.

Re: 26mm jetex jetting problems

Postby Lambr62 » Sun May 24, 2015 9:27 pm

Hi,
Please see attached photo of spark plug after going out today, colour looks better than previously. This is with 45 pilot 128 main & 5899-2 Atomiser from Allstyles. Tried a 50 pilot ran too rich spark plug well sooted up. 48 pilot was better but still felt too rich at low revs. 45 pilot gives crisper throttle response after reseting mixture screw so will leave that as is for now. I am going to do plug chop next as mentioned in previous posts. Have not checked for leak around manifold yet, but will check this also just in case. Thanks again for all the help.
You do not have the required permissions to view the files attached to this post.
Lambr62
 
Posts: 81
Joined: Sat Jun 21, 2014 1:42 pm

Re: 26mm jetex jetting problems

Postby Toddy » Mon May 25, 2015 7:22 am

Colour looks like it is getting better from last plug chop picture , I would do a few more at different throttle openings 1/4,1/2,3/4,full to get a good set up
User avatar
Toddy
 
Posts: 10196
Joined: Tue May 13, 2014 9:58 pm
Location: East Yorkshire

Re: 26mm jetex jetting problems

Postby Raveydavey » Mon May 25, 2015 4:43 pm

Toddy wrote:Colour looks like it is getting better from last plug chop picture , I would do a few more at different throttle openings 1/4,1/2,3/4,full to get a good set up


Completely agree, it might look great at one position and terrible at another...a challenge I am working through ,self right now. Patience is a virtue. :|
User avatar
Raveydavey
 
Posts: 295
Joined: Wed Jan 28, 2015 8:32 pm
Location: Kettering Massive

Previous

Return to Carburettors

Who is online

Users browsing this forum: No registered users and 0 guests