Hi,
I have a series 3 Li 150 and wondered if anyone knows if there is a specific torque setting for the screws that secure the Kick start ramp plate. I cant find any information for this. Thanks in advance.
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
Kickstart ramp torque settings
3 posts
• Page 1 of 1
Kickstart ramp torque settings
by Lambr62 » Mon Aug 31, 2015 7:22 pm
- Lambr62
- Posts: 81
- Joined: Sat Jun 21, 2014 1:42 pm
Re: Kickstart ramp torque settings
by Knowledge » Mon Aug 31, 2015 7:25 pm
Not every bolt has a torque setting. Just tighten it up until it is tight.
(I don't own a torque wrench. They are not an essential tool)
(I don't own a torque wrench. They are not an essential tool)
-
Knowledge - Posts: 1968
- Joined: Sat May 31, 2014 11:42 am
- Location: Ipswich
Re: Kickstart ramp torque settings
by Dimitrios_231 » Mon Aug 31, 2015 8:10 pm
It has three M6 bolts,5NM minimum on each bolt and you'll be fine.
-
Dimitrios_231 - Posts: 981
- Joined: Fri May 30, 2014 1:15 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 16 guests