Wiring loom

[wurzel]

Hi, it's a while since I bought a wiring loom for a standard 12 volt electronic and
have just been looking for one for a GP. The trouble is there seems to be that many
it's got my head spinning.
Could anybody recommend a good quality standard 12 volt loom with the correct
coloured wires and connectors and decent gauge wire

Cheers in advance

[St George]

Mate there are many variations in Sticky's book. I find Scooter Restorations very helpful 0115 9277277. or scooterrestorations.com for their website. Good service. A cheap electrical tester will help from Maplins. Top tip, don't use cheap connectors.

Colin

[Knowledge]

Hi,

I have sold a terminal crimping kit, which includes an excellent crimping tool and many terminals (spades and bullets).



It makes lovely crimped terminals, like those found on original wiring looms.



I think I have one left, so if someone fancies it, I'll do it for £24 inc postage, as you are LCGB people.

[genolambo]

Hi,

I have sold a terminal crimping kit, which includes an excellent crimping tool and many terminals (spades and bullets).



It makes lovely crimped terminals, like those found on original wiring looms.



I think I have one left, so if someone fancies it, I'll do it for £24 inc postage, as you are LCGB people.

Looks a great bit of kit that.

[genolambo]

Hi, it's a while since I bought a wiring loom for a standard 12 volt electronic and
have just been looking for one for a GP. The trouble is there seems to be that many
it's got my head spinning.
Could anybody recommend a good quality standard 12 volt loom with the correct
coloured wires and connectors and decent gauge wire

Cheers in advance

Got mine from here. Real good quality

http://www.ebay.co.uk/itm/LAMBRETTA-12V ... 3a93524eab" onclick="window.open(this.href);return false;

[DaveTomo]

Got mine from here. Real good quality

http://www.ebay.co.uk/itm/LAMBRETTA-12V ... 3a93524eab" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

+1

[Toddy]

Got mine from here. Real good quality

http://www.ebay.co.uk/itm/LAMBRETTA-12V ... 3a93524eab" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

+1

I know the guy who makes and sells these, great quality and he can make to your own spec if required also he is a scooterist as well , he was on here as Barney i dont know if he has re registered though if any one needs a contact number i can send via PM .

[Rich Oswald]

Hi,

I have sold a terminal crimping kit, which includes an excellent crimping tool and many terminals (spades and bullets).



It makes lovely crimped terminals, like those found on original wiring looms.



I think I have one left, so if someone fancies it, I'll do it for £24 inc postage, as you are LCGB people.

Looks a great bit of kit that.

IT IS !