Ready cut Cylinder cowl for TS1

[soullad]

Hi, Does anybody sell cylinder cowls ready cut for the TS1 barrel / reed block / oval exhaust etc
Cheers, Ian

[a.lo]

AF do them , i got a TS1 type to hopefully fit an Atomic reed valve better they also have a RB type. i do not know the difference probably a bit more cutaway which may or not have suited my need better.not fitted yet so unsure.

[Wack]

The AF ones are a lot thicker which should stop it splitting but when I fitted one the 3 bolt holes were miles out so had to weld them up resulting in having to use Allen screws in the 2 mag housing threads as no room for an 8 mm headed bolt. Seems to me the form was taken off the outside of a cowl resulting in it being larger.

[Dazts1]

Try Andy Francis. I don't think you'll find a better one off the shelf.

[soullad]

Cheers fellas

[Toddy]

Try Andy Francis. I don't think you'll find a better one off the shelf.

+1

[a.lo]

Try Andy Francis. I don't think you'll find a better one off the shelf.

excuse me if i am wrong, but aren,t these the AF ones anyway?

[Toddy]

Try Andy Francis. I don't think you'll find a better one off the shelf.

excuse me if i am wrong, but aren,t these the AF ones anyway?

Dont think unless he has changed , Andy was doing these Before AF fetched theirs out mine has a thick wire/weld to stop splitting and was powder coated

[soullad]

I have been reliably informed that these are not the same as the AF versions. I have ordered one so can pop a pic up if anyone wants when it arrives?

[Wack]

Mine came from Andy Francis and I presumed they were the same as AF's. Either way it didn't fit and I also had to mod the fly cowl where it sits over the lower mag casting that holds the head cowl.

[Toddy]

Mine came from Andy Francis and I presumed they were the same as AF's. Either way it didn't fit and I also had to mod the fly cowl where it sits over the lower mag casting that holds the head cowl.

Strange that mine was spot on mine was on a ts

[Dazts1]

Andy has them modified. The man who modifies them has been doing them for a while. I don't think I've seen a better head cowl out there. They probably are AF ones but modified.

[Norrie Bodge]

Just took mine to coaters without trying it?
Hope the F@@ker fits?