Egt fitting

[Wack]

Having scoured eBay with no joy, does anyone know where I can get a weld on fitting for an EGT probe that uses an olive and nut to tighten. Thanks

[foremanbob]

in the states tho... might find more in the uk....

http://www.motorsportsinnovations.com/EGT/egt.htm

[MickYork]

I seem to think I sourced mine from a hydraulic hose/fitting supplier (Pirtek) ? The outer thread and nut is a tapered stud which help ensures an air tight seal.

[Wack]

Thanks chaps, I'll try a local hydraulic stockist.

[Stesjh]

You may want to try Skydrive, it's where I got all mine from http://www.skydrive.co.uk/

[Adam_Winstone]

I use these on a number of my bikes and am very happy with them. The weld on fixing and bolt on probe arrangement is very secure, unlike the jubilee clip fitting.

http://www.skydrive.co.uk/proddetail.asp?prod=EP001%2FS

Good company to deal with too.

Adam

[Adam_Winstone]

^^^... you beat me to it!!

[Rich Oswald]

You may want to try Skydrive, it's where I got all mine from http://www.skydrive.co.uk/

+1

[AlG]

Skydrive: +2

[jonoy]

Will this work with a stage 6 guage

[Wack]

TBH Ive found the Skydrive/Airworld sensors to not last too long, the internal wires break where they enter the probe. Some of the Chinese EBay ones last longer as they have a flexible spring to support the wires like the Stage 6 ones, which if you shop about can be found for £37 for the longer type plus they have the plug already fitted.

[jonashford]

anthony tambs of gammatech hes on facebook

[Toddy]

anthony tambs of gammatech hes on facebook

+1

[matthew]

anthony tambs of gammatech hes on facebook

This is where Anthony Tambs get them from...
http://www.ebay.co.uk/itm/Stainless-Ste ... 1627444040