LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Skip to content

26mm dellorto settings

Want to know which carb to choose? Having problems setting up the jetting details on your scooter? Wheter you are using a standard or tuned carb, ask your question here.
Post a reply

26mm dellorto settings

Postby Omega 7 » Sun Jun 19, 2016 7:55 pm

I'm thinking of putting a 26mm phbh onto a standard gp200, clubman exhaust and through the air box. Anyone got a similar set up or any idea of a starting point for the jetting. Thanks
Omega 7
 
Posts: 28
Joined: Tue Jun 03, 2014 10:06 am
Top

Re: 26mm dellorto settings

Postby hullygully » Mon Jun 20, 2016 5:23 pm

I had lots of fun (not) jetting mine, run thru drilled & hollowed out airbox, side panel compressed carb rubber due to NOT using a Broady carb rubber, during a recent re-build I managed to take another 3/5mm off the manifold, hence pushing the rubber back a smudging further. 8-)
hullygully
 
Posts: 2221
Joined: Thu Jun 05, 2014 1:28 pm
Location: Hull
Top

Re: 26mm dellorto settings

Postby dave411 » Mon Jun 27, 2016 4:13 pm

What is a Broady carb rubber?
I have a problem with my air intake rubber fouling on the side panel.
User avatar
dave411
 
Posts: 247
Joined: Sat Jun 07, 2014 1:31 pm
Location: Sunny Cardiff
Top

Re: 26mm dellorto settings

Postby hullygully » Mon Jul 04, 2016 6:26 pm

the rubber that holds the carb onto the manifold, its about 10mm shorter than the VE one I originally used
hullygully
 
Posts: 2221
Joined: Thu Jun 05, 2014 1:28 pm
Location: Hull
Top
Post a reply

Return to Carburettors

Who is online

Users browsing this forum: No registered users and 4 guests

Powered by phpBB® Forum Software © phpBB Group