Can someone tell me ( or offer any advice) where I can get a smiths tacho , cable and drive ( chaincase mounted) as per Af/ 60s spec, they are all different ratios so would be good to get the right drive for the right tachometer!!
Cheers....
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
Smiths mechanical tacho
14 posts
• Page 1 of 1
Smiths mechanical tacho
by Nobby » Mon Oct 06, 2014 12:33 pm
-
Nobby - Posts: 303
- Joined: Fri May 30, 2014 9:56 pm
Re: Smiths mechanical tacho
by Nobby » Mon Oct 06, 2014 12:34 pm
Also which tachos were originally used...
-
Nobby - Posts: 303
- Joined: Fri May 30, 2014 9:56 pm
Re: Smiths mechanical tacho
by Afandy » Mon Oct 06, 2014 2:02 pm
Tim Mason is the expert on these ....on here
- Afandy
- Posts: 185
- Joined: Fri May 30, 2014 5:10 pm
Re: Smiths mechanical tacho
by gerryjunior » Mon Oct 06, 2014 6:25 pm
i dont know if there was a specific type, i matched my speedo as close as possible, i bought mine on ebay and had it recalibrated by A GAGG & sons, very nice to deal with , he supplys the drive and made the cable etc, its costly though , if you can buy one on here already done you would be better off, heres a pic of mine ....
- gerryjunior
- Posts: 83
- Joined: Sun Jul 20, 2014 8:32 pm
Re: Smiths mechanical tacho
by nickw » Mon Oct 06, 2014 8:20 pm
You will not be disappointed with Tim Mason. Unless you're lucky you 'd be hard to beat his prices.
- nickw
- Posts: 676
- Joined: Sat Jun 07, 2014 10:44 am
- Location: Chesterfield
Re: Smiths mechanical tacho
by prog54 » Tue Oct 07, 2014 9:11 pm
Hi Nobby
A Gagg & sons http://www.gagg-and-sons.freeserve.co.uk/main.html
supply tachos for lambretta's
I believe the only ones available now are 10,000 rev, speak to them and they will advise.
Hope this helps
terry
A Gagg & sons http://www.gagg-and-sons.freeserve.co.uk/main.html
supply tachos for lambretta's
I believe the only ones available now are 10,000 rev, speak to them and they will advise.
Hope this helps
terry
- prog54
- Posts: 68
- Joined: Sat May 31, 2014 9:17 am
Re: Smiths mechanical tacho
by Dimitrios_231 » Sat Nov 12, 2016 7:41 pm
Ι did this today,it took me lots of hours...
it's not finished but I'm on my way
it's not finished but I'm on my way
You do not have the required permissions to view the files attached to this post.
-
Dimitrios_231 - Posts: 981
- Joined: Fri May 30, 2014 1:15 pm
Re: Smiths mechanical tacho
by xenia1 » Sat Nov 12, 2016 9:24 pm
RallyMaster Dimitrios? Any more pictures 
-
xenia1 - Posts: 1375
- Joined: Mon Jun 02, 2014 7:53 pm
- Location: Malaga Espana/ Norwich UK.
Re: Smiths mechanical tacho
by Dimitrios_231 » Sat Nov 12, 2016 11:04 pm
Sorry,
I won't post more.
I won't post more.
You do not have the required permissions to view the files attached to this post.
-
Dimitrios_231 - Posts: 981
- Joined: Fri May 30, 2014 1:15 pm
Re: Smiths mechanical tacho
by Dimitrios_231 » Sun Nov 13, 2016 3:05 pm
Job's done,
the drive now sits flush and tight.
the drive now sits flush and tight.
You do not have the required permissions to view the files attached to this post.
-
Dimitrios_231 - Posts: 981
- Joined: Fri May 30, 2014 1:15 pm
Re: Smiths mechanical tacho
by Dimitrios_231 » Sun Nov 13, 2016 3:07 pm
These pics of the scooter (taken few years ago) were already published 
You do not have the required permissions to view the files attached to this post.
-
Dimitrios_231 - Posts: 981
- Joined: Fri May 30, 2014 1:15 pm
Re: Smiths mechanical tacho
by Dimitrios_231 » Tue Nov 15, 2016 11:42 am
I checked it yesterday,it works.
-
Dimitrios_231 - Posts: 981
- Joined: Fri May 30, 2014 1:15 pm
14 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 17 guests