LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Skip to content

GT 200 30mm dellorto / BGM

Want to know which carb to choose? Having problems setting up the jetting details on your scooter? Wheter you are using a standard or tuned carb, ask your question here.
Post a reply

GT 200 30mm dellorto / BGM

Postby compass » Mon Mar 20, 2017 12:05 pm

Hi Guys , running above with following..
130 main
55 pilot
AV 268
X13 2nd clip down

Runs absolutely fine when revved past quarter throttle, however around quarter throttle its very boggy and rich.

Should I move clip?
Anyone else running the same?

Cheers 8-)
compass
 
Posts: 166
Joined: Wed Feb 04, 2015 3:12 pm
Top

Re: GT 200 30mm dellorto / BGM

Postby coaster » Mon Mar 20, 2017 8:11 pm

Have tried lowering the needle?
User avatar
coaster
 
Posts: 2678
Joined: Fri May 30, 2014 1:00 pm
Location: Norfolk, Flying 8 Balls
Top

Re: GT 200 30mm dellorto / BGM

Postby Donnie » Mon Mar 20, 2017 8:23 pm

Cetainly sounds like you need to lower the needle, ie top clip and see.
If it's still boggy you may either want to try an x7 (slightly weaker needle) with the AV268, or go to a AV266 atomiser and stick with the x13
User avatar
Donnie
 
Posts: 1114
Joined: Fri May 30, 2014 8:19 pm
Location: Kempston, UK
Top

Re: GT 200 30mm dellorto / BGM

Postby compass » Mon Mar 20, 2017 10:31 pm

Will try lowering the needle at weekend and will let you know.
compass
 
Posts: 166
Joined: Wed Feb 04, 2015 3:12 pm
Top

Re: GT 200 30mm dellorto / BGM

Postby swissdean » Tue Mar 21, 2017 2:06 pm

coaster wrote:Have tried lowering the needle?

+1 had same, raised clip to top and all fine
User avatar
swissdean
 
Posts: 115
Joined: Wed Jun 11, 2014 9:27 am
Top
Post a reply

Return to Carburettors

Who is online

Users browsing this forum: No registered users and 4 guests

Powered by phpBB® Forum Software © phpBB Group
cron