Is this stand bent or not? the scooter would rock back and forth. I know the feet were worn. Want to make sure the left side as you look at the pic is correct.
Thanks
eyeguy
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
stand
4 posts
• Page 1 of 1
Re: stand
by EddieStone » Sun Apr 02, 2017 9:50 pm
I think one leg is different to clear the exhaust. Lambretta stands are not meant to lift a wheel in the air, they just stop it from falling over.
-
EddieStone - Posts: 219
- Joined: Tue Aug 25, 2015 5:58 pm
- Location: Plymouth
Re: stand
by Knowledge » Sun Apr 02, 2017 10:13 pm
The stand looks about right.
Most issues with stand rocking are related to where the stand-hooks clamp through the frame cross member. Often, the bolts will start to pull through the crossmember. With age, it all starts to get a bit ugly, and repair usually involves heating, welding, grinding and painting.
Most issues with stand rocking are related to where the stand-hooks clamp through the frame cross member. Often, the bolts will start to pull through the crossmember. With age, it all starts to get a bit ugly, and repair usually involves heating, welding, grinding and painting.
Last edited by Knowledge on Mon Apr 03, 2017 8:58 am, edited 1 time in total.
-
Knowledge - Posts: 1968
- Joined: Sat May 31, 2014 11:42 am
- Location: Ipswich
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 16 guests