which carburetta?

[WOO]

Can anyone help please with carb choice for my restoration
With a 175 conversion (with an iron head) of a 1960 series 2 LI125
which carb would be the best to use
is the jetex s100 22mm any good

[Watfordwhite]

I have a 28mm Deli on mine, but it has been heaverly tuned. Runs great.

[ToBoldlyGo]

I'd go for a 20mm carb personally. Perfect for a 175 top end. Probably finish it off with a standard exhaust.

[Meds]

I can only give my personal experienc of Jetex carbs.
I have always has trouble with them.
There are many on here who can get them to work fine, I never could.
The scootopia 22mil carb is suppose to be quite good, but never used them.

[WOO]

thanks meds, which one do you use?

[kennystag]

Hi WOO,
scootopia 22 mm carburettor, Ebay item number 152933890808 or any ware else, I have not had any problems with the 22 mm scootopia carb.
Cheers
Stag

[kennystag]

Woo I forgot to say I have the same set up as you have with the 175 top end on my GP 150.
Cheers
Stag

[WOO]

cheers, will have to get a scootopia carb,

[HxPaul]

cheers, will have to get a scootopia carb,

viewtopic.php?f=6&t=7900&p=77252&hilit=float#p77252 10 posts down

[HxPaul]

Fitted a genuine dellorto float.From seam to seam its 1/2mm thinner than the scootopia float,side to side and back to front.

[Meds]

I’m using dell or to PHBH 28 and a 30.