Ron Moss Box Piper

[Simon_T]

Hi all,
anyone running one of the new Ron Moss box pipes on a ts 1 if so what's there thoughts please.

[Adam_Winstone]

Nope, got one on a 240 Mugello but not a TS1

[dickie]

Like a bgm clubman but really nicely fabricated.

Sensible noise level.

Typical box pipe straight line power curve.

Never screamed it yet as my motor is not run in.

I had to mess a little to get it to fit, but I'm not sure if that was due to my casings or the pipe. I discussed this at length with ron moss who was typically helpful, but I ended up resolving it myself without ever finding out what the root cause was. I think the second batch was going to be different for this reason.

[Simon ELC]

I have one of Ron's new Clubmans on my TS1 253 which replaced a Franspeed Race.

It pulls a 4.4 final drive on an AF 5 speed box.

Loads of grunt from low down, but i did lose a load of BHP compared to the expansion as you would expect.

Mine fitted perfectly, but one small problem was that one of the baffles came loose. Ron resolved the problem by bringing a brand new pipe directly to my house in person.

Top Product, Top Service, Top Man

[Toddy]

I have one of Ron's new Clubmans on my TS1 253 which replaced a Franspeed Race.

It pulls a 4.4 final drive on an AF 5 speed box.

Loads of grunt from low down, but i did lose a load of BHP compared to the expansion as you would expect.

Mine fitted perfectly, but one small problem was that one of the baffles came loose. Ron resolved the problem by bringing a brand new pipe directly to my house in person.

Top Product, Top Service, Top Man

That is great service

[Psychedelicropcircle]

Am I reading this correct possibly 8 yrs after the RM clubman was spoken of being made it’s actually on the market?

[rossclark]

Am I reading this correct possibly 8 yrs after the RM clubman was spoken of being made it’s actually on the market?

https://www.torbaylambretta.co.uk/Avant ... 77422.aspx

[Mr G in NYC]

Am I reading this correct possibly 8 yrs after the RM clubman was spoken of being made it’s actually on the market?

Yep, worth the wait , I'm running one on my GT 186 , + 25mm carb GP Late Indian Box ,
So far very nice pulls like a train
will be fitting one also to a 5 speed TS1 to get a feel of how it is on a higher tuned motor ....
G.

[Scooterlam]

G speak to ginger, he done some of the r&d with Ron on his ts1.
Or fit and play more fun that way.

[gp200ts1]

I've had a mark 1 Ron moss pipe fitted to my series 2 5 speed avanti 225 for the last 4 years at least. it pulls like a train taking me to a genuine 75mph on the gps. i'm 17 1/2 stone so that's no mean feat. i'm looking at the new pipe as I've recently had problems with the baffles coming loose and killing power. means i have to take the exhaust off and shake the bits out.

[Mr G in NYC]

G speak to ginger, he done some of the r&d with Ron on his ts1.
Or fit and play more fun that way.

Roger that , G

[Dimitrios_231]

I've had a mark 1 Ron moss pipe fitted to my series 2 5 speed avanti 225 for the last 4 years at least. it pulls like a train taking me to a genuine 75mph on the gps. i'm 17 1/2 stone so that's no mean feat. i'm looking at the new pipe as I've recently had problems with the baffles coming loose and killing power. means i have to take the exhaust off and shake the bits out.

I still use an early RMR pipe,it is a revvy exhaust,very satisfied with it,
it also had the 'baffles' problem but nobody and nothing is perfect in this world