Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models
by Cosmic Wizard » Fri Jun 21, 2019 8:58 am
Morning everyone,
I've got a Series 1 which I'm about to start recommissioning. I've found a small bracket for the stand which appears to have come off the floor crossmember (see pic).
Could one of you knowledgeable people tell me if it was welded on and if so, was it spot welded?
Or, were there studs attached to it which go through the crossmember and fit to the plate the other side?
Thanks in advance,
Jim
rps20190621_085636.jpg
You do not have the required permissions to view the files attached to this post.
-
Cosmic Wizard
-
- Posts: 49
- Joined: Fri Aug 18, 2017 5:36 am
- Location: London
by foremanbob » Fri Jun 21, 2019 11:07 am
There are two small bolts at the bottom, and two small bolts at the top... No Welds
-
foremanbob
-
- Posts: 217
- Joined: Sat May 31, 2014 6:02 pm
- Location: Renfrewshire
by HxPaul » Fri Jun 21, 2019 11:48 pm
The peice thats hanging down is spot welded to the cross member.The back bracket is fastened at the bottom with two nuts and bolts,its fastened at the top by two nuts and bolts which go through the cross member.
-
HxPaul
-
- Posts: 1583
- Joined: Fri May 30, 2014 9:18 am
- Location: Halifax
Return to Series 1, 2 & 3
Who is online
Users browsing this forum: AlG, Google [Bot], Majestic-12 [Bot] and 26 guests