Eibar Series 2 speedo cable

[Storkfoot]

I think this is the cable I have at the moment but it doesn't fit the pitch at the speedo end. Can anyone point me in the right direction please?

http://www.scooterrestorations.com/lamb ... es-3-grey/

It's a '62 Li150 if that makes any difference

[gaz_powell]

I thought there were only Italian or indian fitments - both different in physical size and not just pitch of thread (indian smaller of the two)

[Storkfoot]

Thanks for the reply, Gaz. Nothing appears to be as it seems .

The speedo takes the thicker cable but neither an Italian nor Indian threaded cap (on the cable) fits the thread on the Eibar speedo. At the moment, I bodged the original threaded cap onto an Italian speedo cable.

I'll have another look tomorrow and measure up the pitch of the cap and speedo.

[gaz_powell]

you learn something new everyday - so eibar ones are different again !