Engine mount replacement

[berniek]

Anyone got any good or poor experiences with the various new engine mounts available. Replacement is required soon and I want some feedback from real users please. Motor is a TS245, so any feedback from similar is appreciated.

Thanks

[berniek]

Should have made clear, larger type GP mounts I mean

[Toddy]

Usally fit the SIL 3 hole ones not really had any issues with them apart from one collapsing coming home from Darlo last year then again they had been in @ 3 years of Rally miles , but decided to try the BGM ones in my Series 1 this year, a bit of a tight fit in the casing but noticed a reduction in Vibration from the sil ones only had them in @ 6 months but look good so far.

[Rich Oswald]

Funny you should say that Toddy as a few people I have spoken to have had worse vibrations with the BGM ones including my mate Chris,

Rich'

[stonerosesmod]

I put Scootopia mounts in mine earlier this year after some indian ones id had in there for a cpl of years.Used it like this for a cpl of months but i couldnt hack the increased vibration,plus it was shaking the scooter to bits! Bought some cheap ones off ebay but they arent great tbh.I think SIL ones for me next time.

[berniek]

Thanks all, I have heard so much conflicting information, so not sure which way to go, reckon i might stick with SIL too. all other comments gratefully recd.

[gaz_powell]

SIL/SRP stamped one from Scooter Restorations for me

Gaz

[nickw]

I also have tried other mounts and have ended up back with SIL.

[Petec]

Also had scootopia'sown in my Ts1 vibrated to death only did 30 miles had to replace with scooter rezzys . But will say scootopia ones are fine for a standard

[Afandy]

I've gone through all availiable engine mounts .....haven't found a decent pair that lasts more than 6 months ...considering the the originals lasted 40 years I've got the latest Scootopia ones....that haven't been fitted as yet...