LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Series 3 front disc

Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models

Series 3 front disc

Postby gazzar15 » Sun Oct 17, 2021 7:59 pm

What is the best non hydraulic kit for a series 3 front disc?
gazzar15
 
Posts: 59
Joined: Mon Jul 13, 2015 9:42 pm

Re: Series 3 front disc

Postby hullygully » Mon Oct 18, 2021 9:10 am

reverse pull, floating drilled disk, & a must is sintered disk pads
hullygully
 
Posts: 971
Joined: Thu Jun 05, 2014 1:28 pm
Location: Hull

Re: Series 3 front disc

Postby dickie » Mon Oct 18, 2021 9:54 am

I did a lot of work on my remade disk recently and to be honest, I wouldn't buy another.

The main problem is the actuator. The dimplesnin them are machined with a radius rathe than being stamped so they aren't hardened, nor is the profile correct. This means the lever has to travel much further than a standard original one. And also that it will wear quicker.

The other problem is that they lugs on remade actuators are too big and stick in the grooves of the back plate. People think the spring is too weak in them, but it's actually just trying to do more work.

I'd look for an original or reverse pull drum is better.
dickie
 
Posts: 1495
Joined: Thu Oct 02, 2014 12:32 pm
Location: Tyne and Wear


Return to Series 1, 2 & 3

Who is online

Users browsing this forum: Adam_Winstone and 12 guests