Looking to buy bgms for my S2 eibar.
Looks like a there could/will be an issue with the dampers fouling against the side mudguard support bracket on the fork leg. Will they run pretty close or would I have to modify the mudguard brkt. Cheers, Will.
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
FITTING BGM DAMPERS TO S2 EIBAR
3 posts
• Page 1 of 1
FITTING BGM DAMPERS TO S2 EIBAR
by johnnyjarvis » Sun Oct 05, 2014 1:03 pm
- johnnyjarvis
- Posts: 31
- Joined: Fri May 30, 2014 7:01 pm
Re: FITTING BGM DAMPERS TO S2 EIBAR
by soullad » Sun Oct 05, 2014 8:39 pm
fit fine mate, they are close but they do fit.
If you are wooried they do a thin set now anyways
If you are wooried they do a thin set now anyways
- soullad
- Posts: 230
- Joined: Sun Jun 01, 2014 8:34 pm
- Location: Flying 8 Balls SC. Norfolk
Re: FITTING BGM DAMPERS TO S2 EIBAR
by peejay » Tue Oct 07, 2014 9:41 pm
hi Johnny
it is a bit snug under the mudguard, i got a club mate to make me a 10mm nylon spacer for each side.
even with that fitted i wouldn't want to have to remove the BGM damper at the roadside but it certainly helps and no one will notice
it is a bit snug under the mudguard, i got a club mate to make me a 10mm nylon spacer for each side.
even with that fitted i wouldn't want to have to remove the BGM damper at the roadside but it certainly helps and no one will notice
- peejay
- Posts: 743
- Joined: Mon Jun 09, 2014 9:07 am
- Location: New Forest, Hants.
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 145 guests