LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Skip to content

Height

Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models
Post a reply

Height

Postby Cgt75b » Wed Mar 06, 2024 10:10 am

Hi folks

What is the best way to check pick up height between the black box n the magnets please?
Cgt75b
 
Posts: 444
Joined: Mon Jul 28, 2014 9:42 pm
Location: Cheshire
Top

Re: Height

Postby lofty » Wed Mar 06, 2024 10:18 am

personally i stick a bit of masking tape on the side of the pickup, mark the pole heights with marker pen, refit the flywheel and then peer through the hole to try and see if the magnet prongs line up or not..
lofty
 
Posts: 118
Joined: Thu Jun 05, 2014 4:05 pm
Top

Re: Height

Postby Cgt75b » Thu Mar 21, 2024 10:09 am

lofty wrote:personally i stick a bit of masking tape on the side of the pickup, mark the pole heights with marker pen, refit the flywheel and then peer through the hole to try and see if the magnet prongs line up or not..


Cheers Lofty.
Cgt75b
 
Posts: 444
Joined: Mon Jul 28, 2014 9:42 pm
Location: Cheshire
Top
Post a reply

Return to Series 1, 2 & 3

Who is online

Users browsing this forum: No registered users and 103 guests

Powered by phpBB® Forum Software © phpBB Group