Dual seat frame dimensions

[507VBH]

Hi,

I have got a new cover for the dual seat on my series 2 but it seems too short. Unfortunately I cannot sure whether the frame I have is a standard Lambretta one as yhere are no markings on it.

Does anybody know the length of a normal seat frame along the top edge?

Cheers

[pacemaker]

from the front pivot bar to the push button at the back I have 22 inches.

[507VBH]

Thanks for the info! Mine is 23.3 inches from the top of the front hoop to the top of the rear hoop. Is this the measurement you took?

Cheers

[pacemaker]

Add an extra half an inch to mine based on your measurement. Mine Giulari frame is on an original series 3 TV
It maybe an aftermarket seat on yours.
Can you post a picture? I have also left you a personal message.

[507VBH]

Hi,

Here are some pictures of the frame and the seat before I stripped off the cover. There are no identifying marks on the frame or old cover. It could well be a 1960's after-market seat - I have no history on it!

top.jpg

2016-01-09 12.33.43.jpg

2015-11-21 11.58.49.jpg

[pacemaker]

I think that is an aftermarket seat frame, the back of the frame is nothing like a the Giulari seat.
Keep the blue cover and see if you can get one made to fit.

[507VBH]

I thought it might be a non-standard seat - thanks for your help!