Hi, I'm hoping to fit a rear brake light switch to the lui that I'm soon to purchase as I'm aware they weren't originally fitted with one as standard & my question is what's my best option to enable a live feed to the switch? thanks in advance regards Darren
In theory it should be pretty simple, the only problem is the monocoque frame. You need to run a wire from the live feed of the rectifier/connection block to the stop light switch then a wire from the switching to the back light which then needs an earth (unless the light unit has a combined earth). Now I'm no expert on the J range but to save any myther an inline brake light switch on the back brake cable (like the std front one) may make things easier