by jbcollier » Fri Feb 19, 2021 5:54 pm
My D is tucked away right now and it would be a heck of a job to dig it out so I could remind myself of what I did. It's just a generic, fit-it-yourself, switch. You need to find a place you can mount the switch where you don't have to drill any new holes, and, is inline with, and to the rear of, the brake cable clamp at the brake pedal. It goes: bracket/switch/spring/brake pedal. It is very unlikely that the spring will be the right length. You can use some metal rod (welding rod or coat hanger) to make it work. In which case it will go: bracket/switch/spring/metal rod/brake pedal.