Technical help for all early models, A, B, C, LC, D, LD, E & F models
by ricey » Sun Feb 08, 2015 5:44 pm
Hi all
Am I right in thinking that the plastic fuel cap on a model d or similar can be used to measure two stroke oil, if so how many to a tank full on a model d.
Cheers iain
-
ricey
-
- Posts: 19
- Joined: Fri Jun 06, 2014 11:46 am
by jbcollier » Tue Feb 10, 2015 3:26 am
It might have worked back in the day when they mixed at 6%+ and used regular engine oil as mix: smoked like heck and regular decokes were the order of the day. Use a good quality 2T mix at 3% and you'll be much happier.
-
jbcollier
-
- Posts: 391
- Joined: Sun Jun 01, 2014 2:57 pm
by ricey » Tue Feb 10, 2015 8:17 pm
Cheers for the reply jb
I've worked out tank capacity to a 5% fuel mix and one cap full of oil is about spot on
So away we go !!!
-
ricey
-
- Posts: 19
- Joined: Fri Jun 06, 2014 11:46 am
by jbcollier » Fri Feb 13, 2015 2:34 pm
I wouldn't run at 5%. Modern 2T oils are light-years better than what was available in the 50s.
-
jbcollier
-
- Posts: 391
- Joined: Sun Jun 01, 2014 2:57 pm
Return to Pre 57
Who is online
Users browsing this forum: No registered users and 20 guests