LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

PHBL25 on Li150

Want to know which carb to choose? Having problems setting up the jetting details on your scooter? Wheter you are using a standard or tuned carb, ask your question here.

PHBL25 on Li150

Postby foremanbob » Sat Jul 13, 2019 9:21 pm

Anybody any idea on Jetting for a PHBL25 on a standard 150

Currently
60 Choke
50 Pilot
D22 Needle 2nd Clip
85 Main
User avatar
foremanbob
 
Posts: 217
Joined: Sat May 31, 2014 6:02 pm
Location: Renfrewshire

Re: PHBL25 on Li150

Postby shane BBoys » Sat Jul 13, 2019 10:43 pm

I’d drop the choke to 45 and the pilot to 50.
No prove of this other than somewhere near a Muggy 186.
See how you go.
Cheers Shane
User avatar
shane BBoys
 
Posts: 378
Joined: Sat Sep 06, 2014 5:46 pm
Location: Bradford

Re: PHBL25 on Li150

Postby Rich Oswald » Mon Jul 15, 2019 10:22 am

shane BBoys wrote:I’d drop the choke to 45 and the pilot to 50.
No prove of this other than somewhere near a Muggy 186.
See how you go.
Cheers Shane


Shane, are you sure you don't mean the other way round ie: choke to 50 and pilot to 45?

Rich'
User avatar
Rich Oswald
 
Posts: 5542
Joined: Fri May 30, 2014 3:30 pm
Location: Wiseman From The East (East Of The Pennines That Is)

Re: PHBL25 on Li150

Postby martyn dwane » Mon Jul 15, 2019 11:38 am

what atomiser are you using ?
martyn dwane
 
Posts: 141
Joined: Tue Jun 03, 2014 10:06 pm

Re: PHBL25 on Li150

Postby foremanbob » Mon Jul 15, 2019 3:49 pm

AQ266 Atomiser
User avatar
foremanbob
 
Posts: 217
Joined: Sat May 31, 2014 6:02 pm
Location: Renfrewshire

Re: PHBL25 on Li150

Postby ULC Soulagent » Mon Jul 15, 2019 4:01 pm

foremanbob wrote:AQ266 Atomiser

Bit rich for a standard 150 I’d imagine
My settings on an Rt200 reedvalve below
25 delly
112 main
70 choke
45 slide
50 idle set 2 turns out
D22needle
AQ 266 Atomiser
300 float jet
User avatar
ULC Soulagent
 
Posts: 1345
Joined: Sun Apr 03, 2016 3:26 pm
Location: Milton Keynes

Re: PHBL25 on Li150

Postby foremanbob » Wed Jul 17, 2019 8:42 pm

Thanks chaps... first experience in trying to set one of these carbs up...

Mate just bought scooter... The seller had bodged a big block manifold onto the Li150 barrell, and used a bit of car radiator hose as the manifold rubber...

I'm having to check everything now...
User avatar
foremanbob
 
Posts: 217
Joined: Sat May 31, 2014 6:02 pm
Location: Renfrewshire

Re: PHBL25 on Li150

Postby AndyVee » Tue Jul 23, 2019 3:02 pm

Hi, can I ask did you get this tuned in - just starting to do exacty the same thing and a known set-up would be helpful to get started. Only difference I have is that I have a 42mm Clubman , but doubt it will make that much difference . . . Cheers
User avatar
AndyVee
 
Posts: 17
Joined: Fri Jan 19, 2018 4:21 pm

Re: PHBL25 on Li150

Postby foremanbob » Tue Jul 23, 2019 4:44 pm

Will let you know once I've sorted out the starting issues.....
User avatar
foremanbob
 
Posts: 217
Joined: Sat May 31, 2014 6:02 pm
Location: Renfrewshire

Re: PHBL25 on Li150

Postby Charliebubble47 » Thu Dec 12, 2019 4:06 pm

Hi Bob
Did you get this sorted and what was the final set up
As I've got something similar and was looking for a good starting point
Cheers
C
Charliebubble47
 
Posts: 37
Joined: Mon Jun 16, 2014 12:05 am


Return to Carburettors

Who is online

Users browsing this forum: Saigonmark and 2 guests