Jetting for 185

[northernpete]

Fitting a 185 barrel and piston in next few weeks (all work been done by Ron Phillips @ Fahron Engineering..... so no worries there) Running a dellorto sh22 with 42 reverse cone clubman......... any suggestions for jetting and should I change slide for 200 one without cut out? Cheers
Oh,,,,,should add, it's a skelly,so open mouth carb with a bell mouth on it....(series 2 LI 150 engine)

[robert gilchrist]

Have you had a look at Cambridge lambretta carb tuning sheet on their website? I found it quite helpful when I used a delly carb

[northernpete]

Thanks, I'll have a look now.......