Jetting for 150 with 22mm Jetex

[Bilko]

As per title.

Does anyone have a ballpark figure for jetting LI150 with a Jetex 22mm

[Knowledge]

Why not start with the jetting for the standard GP150?

[Bilko]

Ok. I looked for that and found a page.

I didn’t realise a 22mm jetex doesn’t fit a standard small block inlet manifold. I’ve been away from standard for too long.

[Knowledge]

I think the 22mm style standard carb manifolds are readily available. Try Scootopia or Scooter Restorations.