LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
timing
5 posts
• Page 1 of 1
timing
by rexton270s » Sat Sep 06, 2014 10:51 am
hi any idea of a starting point for the timing on my avanti with varietronic ignition, before i put in on a strobe light??
- rexton270s
- Posts: 77
- Joined: Tue Jun 17, 2014 4:51 pm
Re: timing
by Knowledge » Sat Sep 06, 2014 5:44 pm
Are you concerned about damaging the engine by starting with the stator in a "non-ideal" position?
I have never set-up a varitronic system, but I would start with the stator screws in the middle of the slots. It is hard to imagine that you can do any harm by starting from here and strobing it before making fine adjustments.
I have never set-up a varitronic system, but I would start with the stator screws in the middle of the slots. It is hard to imagine that you can do any harm by starting from here and strobing it before making fine adjustments.
-
Knowledge - Posts: 1957
- Joined: Sat May 31, 2014 11:42 am
- Location: Ipswich
Re: timing
by corrado » Wed Sep 10, 2014 11:27 pm
I set mine at 20 degrees at tick-over, should give me around 14 degrees at 6,000 rpm. Asuming I've read the blurb correctly.
-
corrado - Posts: 610
- Joined: Sun Jun 01, 2014 1:49 am
- Location: Blackpool
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 24 guests